PL20 1kw-12kw
PL20 1kw-12kw

PL20 series inverter is wallmount design and built-in solar charge controller.It is a beautiful and practical inverter for home solar power system.

Scudo 400VA/600VA Standby UPS
Scudo 400VA/600VA Standby UPS

1,AC/Solar charging hybird off grid inverter;

2,LED/LCD display,Enhanced functions setting via LCD,Man-machine intelligent design;

3,Built-in 40A/60A optional MPPT solar charge controller;

4,Remote external dispaly panel realize remote operation;

5,Five stages adjustable AC charging current,AC charging also can be closed;

6,AC/DC priority modes can be set;

7,Generator restart single(Dry contact);

8,Three times peak power,strong loading capacity;

9,Over load,output short circuit protection.

Model No.PL20-1000PL20-2000PL20-3000PL20-4000PL20-5000PL20-6000PL20-8000PL20-10000PL20-12000
Nominal Power1000W2000W3000W4000W5000W6000W8000W10000W12000W
AC Input
Phase & waveformSingle phase & Pure Sine Wave
 Voltage Range85-130VAC for 120VAC,185-265VAC for 230vac185-265VAC for 230vac
Frequency50Hz:41-54HZ or 60Hz:51-64HZ (auto sensing)
AC Output
Phase & waveformSingle phase & Pure Sine Wave
Voltage Regulation±10%rms
Peak Power3 times of rating power
AC charger
Norminal Charging Current20A/35A/50A/70A/90A (5 stages adjustable charging current)
Over charge protectionBat.V≥15.5VDC for 12V battery,Bat.V≥31.0VDC for 24V battery,
Bat.V≥62.0VDC for 48V battery,beeps 0.5s every 1s & fault after 60s
Three stage chargingBoost CC (constant current stage) 
Boost CV (constant voltage stage)
Float (constant voltage stage)
Solar charge controller
Rated charge cuurent40A or 60A
Rated charge battery voltage type12v/24v/48v   40A ; 12v/24v  60A
Max. PV open circuit array voltage12V for 40Vdc,24V for 55Vdc,48V for 110Vdc
Charge modeMPPT
PV low voltage re-connectPV≥Bat.v=3V
PV low voltage disconnectPV≤Bat.v
Battery voltage
Norminal DC input Voltage12v/24v24v/48v48v
Minimum Start Voltage10V for 12V, 20V for 24V, 40V for 48V
DC input voltage range10.5VDC±0.3VDC ~ 16VDC±0.3VDC for 12V
20VDC±0.6VDC ~ 32VDC±0.6VDC for 24V
42VDC±1.2VDC ~ 164VDC±1.2VDC for 48V
Transfer Efficiency
Line Mode>95%
Battery Mode>88%
Transfer time
AC to DC20ms(max)
DC to AC15ms(max)
System parameter
ProtectionsLow battery voltage,over charging,over load,over temp
Over load protection110%Load>150%,beeps 0.5s every 1s, and fault after 20s.
Output short circuit protectioncurrent limit (fault after 10s)
Surge rating(10s)1:3(VA)
Power saverLoad 25W(Enabled on "P/S auto" setting of remote control )
IndicatorsLED&LCD display
General specifications
Operating Temperature0 to 40
Storage temperature -15 to 60
Opration humidity5% to 95% (non condensing)
Audible Noise≤60dB
CoolingForced air,Variable speed fan

* Product specifications are subject to change without further notice