PL18 1000W-6000W
PL18 1000W-6000W

PL18 Series inverter can provide reliable pure sine wave power by solar power or main power for business , home , workstations, important electronic devices. Optional 1000 to 6000W models , which can be used in the most common electrical power.

Scudo 400VA/600VA Standby UPS
Scudo 400VA/600VA Standby UPS
Scudo 400VA/600VA Standby UPS
  • LCD digital display show voltage, load and battery information  in real time.

  • Peak power is three times of rated power.

  • Can work with inductive load such as air conditioner, motor door and so on.

  • Pure sine wave output, available for sensitive load.

  • 4-step progressive charging, 7 battery type selector.

  • Fast and powerful charger with 35A and 70A.

  • Accept generators energy output.

  • High power factor 0.9, low power consumption.

  • Automatically transfer between battery and line modes.

  • Microprocessor control guarantees high reliability.

  • Bypass without battery connected

  • Remote control function.

  • Protection against: Over load, over temperature, over charging, low battery

  • Reverse connection (optional by hard connector), Blackout

Model No.PL18-1000PL18-1500PL18-2000PL18-3000PL18-4000PL18-5000PL18-6000
Nominal Power1000W1500W2000W3000W4000W5000W6000W
AC Input
Phase & waveformSingle phase & Pure Sine Wave
Voltage120VAC/230VAC OR 220/230/240VAC
Acceptable Voltage95-126VAC   OR    194-253VAC±4%
Line Low Transfer85V±4%/184 (154 wide mode±4%)
Line Low Return95V±4%/194 (164 wide mode±4%)
Line high Transfer135V±4%/253±4%
Line high Return127V±4%/243±4%
Frequency50Hz or 60Hz (auto sensing)
Line Low Transfer47Hz for 50Hz, 57Hz for 60Hz
Line high Transfer55Hz for 50Hz, 65Hz for 60Hz
Phase & waveformSingle phase & Pure Sine Wave (bypass mode sync to input)
Voltage110/120/130VAC   OR   220/230/240VAC±10%rms 
(bypass mode sync to input)
Voltage Regulation±10%rms (bypass mode sync to input)
Frequency50Hz±0.3Hz (bypass mode sync to input)
Peak Power3 times of rating power
Short Circuit ProtectionYes, shutdown after 10ms
Power Factor0.9-1.0
DC Input
Battery Voltage12V/24V12V/24V/48V24V/48V
Minimum Start Voltage10V for 12V, 20V for 24V, 40V for 48V
Low Battery Alarm10.5V for 12V, 21V for 24V, 42V for 48V
Low Battery Transfer10V for 12V, 20V for 24V, 40V for 48V
High Voltage Alarm16V for 12V, 32V for 24V, 64V for 48V
Max Charging Current20A/35A/50A/75A/90A(According to the inverter model)
Over Charge Voltage15.7V for 12V, 31.4V for 24V, 62.8V for 48V
Transfer Efficiency
Line Mode>95%
Battery Mode>88%
power saverAvailable when the load is less than 25 Watts
7-LED DisplayFrom the right to the left,LED1 line mode (green lighting),LED2 inverter mode
(green lighting),LED3 charging mode(yellow lighting),LED4 Fully charged
(green lighting),LED5 over heat shutdown(red lighting),LED6 Overloaded
shutdown(red lighting),LED7 Saving Mode(green lighting)
3-LED Display

Charging Mode(green lighting),inverter mode(green lighting)

, Alarm(red lighting)

Switch selector

Saving Mode is on/off when push the switch forwards/backwards,

 keeping it horisontal is turning the inverter off.

Audible AlarmSounding when the heatsink's tem is over 105℃and shutdown after 30 seconds.
Protectionslow battery,over charging,over temp,over load
Operating Environment0-40℃,0-90%RH(non-condensing)
Audible Noise<60dB
Net Weight(KG)15.5182025.53639.548
Dimension, L X W X H(mm)446*218*179605*218*179